Competition Systems

Ferrari F458GT3 TPMS Only Front Harness

Used with our F458GT3 TPMS Kit. This harness has only the TPMS sensors. Use 74-515A for the full Pro Spec harness with extra sensors

Ferrari F458GT3 TPMS Only Rear Harness

Used with our F458GT3 TPMS Kit. This harness has only the TPMS sensors. Use 74-516A for the full Pro Spec harness with extra sensors

Compsystems Pro Spec Steering Wheel

A six button steering wheel with Otto Controls P9 switches, two rotary10 position switches, autosport connector and coily cord. Comes in 300 or 350mm diamter wheel and with a bolt on or weld on quick connect.

Please specify button arrangement when ordering.

Ford Kent 1600 Xflow Classic Throttle Engine Harness

An EFI retrofit engine harness for use with our Heritage throttle body kit and the Emtron SL4 engine control unit.

Jaguar XKE 6 cylinder Classic Throttle Harness

Designed for use when retrofitting classic Jaguars with either Heritage or Classic Throttle throttle body kits, this kit comes with a high quality MTA fuse box and is wired for use with a Motec M800.

Other ECU's can be accomodated on request.

Dodge R5 Small Block Engine Harness - Club Spec

This harness is intended for use on Dodge R5 NASCAR engines when using them in an alternate chassis. The required sensors and actuators are listed in the detailed description.

Jaguar XJ V12 Classic Throttle Engine Harness

Designed for use with our Classic Throttle EFI kit and a Motec M150 ECU.

This harness comes with a Milspec 22-55 bulkhead connector so it also requires PN 79-630A for the cabin side ECU end.

Fuel Pressure Regulator Housing RH01

A billet aluminium fuel pressure regulator housing with -6JIC fittings and designed for Magneti Marelli/Weber and Bosch (DR2/Mini A /38/5) regulators The 9.4mm relates to the hole diameter required to suit the 'o'ring on the outlet of the regulator.

Carbon Fibre Cross Ram Airbox Kit 96-010A

Designed for cross ram ITB applications on many different V8's, these airboxes are spplied with undrilled backing plates which can be adapted to any suitable throttle body set up.

Backing plates can also be supplied drilled to your needs.

The finish is an RTM dry carbon finish. A gloss clear coat can also be supplied as an option.

Compsystems 8C Auxiliary Air Control Manifold

Allows idle bypass control, brake vacuum and manifold pressure to be used with any individual runner intake (ITB) manifold.

2 Way Sealed Fem. Connector 1.2 mm - 4H0 973 702 A

A 2 way sealed connector housing, commonly used on temperature sensors.

AMP SUPERSEAL 1.5 Series, 1 Way Cable Mount Socket Connector

SUPERSEAL series 1.5 automotive connectors offered in plug housings for receptacle contacts, and cap housings for tab contact variants.