Magneti Marelli 1bar MAP Sensor PRT03
Price:
$159.50
Each pressure sensor exploits the piezoresistive properties of silicon devices. The sensing element is a Wheatstone bridge located on
a mechanically-shaped silicon chip. A thick film hybrid circuit for signal amplifying is included in the same package. The same circuitry
provides thermal compensation and noise reduction.
These active devices are housed in hermetically sealed plastic protective casings.
Ducati part Number - 552.4.002.1A
- 748
- 916RS
- 996RS
- 998RS
- & Most other injected models pre-2002
Technical data
Mechanical Characteristics
Dimensions (maximum) .........76,5x65.0x32.0 mm
Nozzle diameter ........................................4.7 mm
Weight ...................................................42.0 g
Connector .....................................Mini-Timer 3 ways
Electrical Characteristics
Power supply ..........................................5.00 Vdc ±0.5
Min pressure output (at 5 Vdc supply) .....0.25 V
Full scale output (at 5 Vdc supply) ..........4.75 V
Output impedance...................... less than 10 W
Performance
Pressure range:
PRT 03/04................................. 17 ÷ 105 kPa
Operating temperature range.......... -40 ÷ 125 °C
Response time .............................less than 2 ms
Accuracy (from nominal values) .................. 1 % f.s.o.
(including non-linearity, hysteresis and repeatability)
Over pressure.......................................... 200 %